Lithium Battery Cell Tester For Polymer Battery Capacity Test

Battery Testing Equipment is a popular newly developed battery testing system for Li-ion cells.

Contact Now

Lithium Battery Cell Tester For Polymer Battery Capacity Test

Description

This Equipment can be used as research machine, as cell positive /cathode pole material, battery cycle life testing etc.

Features

*Voltage and current: 5V/1A; 5V/2A; 5V/3A; 5V/5A; 5V/6A; 5V/10A

*Channels: 96,128,256,512,768 or others.

*Battery type: Polymer battery

*Support battery height: The pole piece is less than 65MM, the width is less than the fixture spacing

*Working power: Three-phase five-wire system AC380V±10%, 50HZ

*Voltage measuring range 0-5V, 1MV resolution

*Battery voltage range: Charge: 0-4.5V; Discharge: 4.5-2V

*Constant voltage range 2.5V-4.5V

Specification

Working power	Three-phase five-wire system AC380V±10%, 50HZ
Work environment	Temperature 0-40 degrees, relative humidity ≤80%
Heat-dissipating method	Take in the wind naturally and exhaust it upward
Channel Parameter
Voltage measuring range	0-5V, 1MV resolution
Battery voltage range	Charge 0-4.5V: Discharge 4.5-2V
Constant voltage range	2.5V-4.5V
voltage accuracy	±(1‰ reading +1‰ full)
Current accuracy	±(1‰ reading +1‰ full)
Software Function
Control mode	Computer connection equipment work, FCL control
Communication mode	RS485 baud rate 57,600
Process set	A maximum of 32 work steps and 256 cycles are se
Charging mode	Constant current, constant pressure
Charging cutoff condition	Voltage, current, time, capacity
Discharge	constant current
Discharge cut-off condition	Voltage, time, capacity
Defensive function	Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity, etc
Time range	Set it anywhere from 0 to 30,000 minutes
Time accuracy	≤±1‰
Sampling inspection period	≤8S
Minimum frequency of data recording	≤8S
Battery sorting	By capacity, time, discharge platform, etc
Data processing	Data, graphs, and loop diagrams