Portable Fingertip Pulse Oximeter And Oximeter Finger Monitor
Pulse Oximeter Introduction
Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc
Pulse Oximeter Features
1. Integrated with SpO2 probe and processing display module
2. Small in volume, light in weight and convenient in carrying
3. Operation of the product is simple, low power consumption
4. SpO2 value display
5. Pulse rate value display, bar graph display
6. Pulse waveform display
7. The display mode can be changed
8. Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage
9. Automatically power off function: when the device is under the state of measuring interface . it will automatically power off within 5 seconds if the finger falls out of probe
10.Display format can be saved after power off
Pulse Oximeter Performance
Display mode: LED
SPO2: Measurement range: 35-99%
Accuracy: +-2%
Pulse: Measure range: 30-240 BPM
Accuracy: +-2 BPM
Pulse Intensity: Bar graph Indication
Power Requirements: Two AAA alkaline Batteries Battery consumption: Two AAA 1.5V, 600mAh alkaline batteries can be continuously used as long as 30 hours
Dimension: Length: 58mm (2.28")
Width: 32mm (1.26")
Height: 34mm (1.34")
Weight: 50g (1.77 ounces) - including two AAA batteries
Operating Temp: 0 - 50 Centigrade
Storage Temp: -10 - 60 Centigrade
Operating Humidity: 15% - 95% RH
Storage Humidity: 10% - 95% RH