Manual AC Power Gantry Spot Welder For Battery Pack Assembly
Description
This kind battery spot welder is mainly used for 18650, 26650, 32650 cylindrical battery, NI-MH battery(nickel-metal hydride battery), Nickel cadmium battery and EV Lithium battery pack Ni tab welding.
Features
1. This type of AC spot welder utilizes the general mains supply to lower the voltage and increase the electric current. Such kind of low voltage but large current will be transmitted from the electrode to the linked point of two work pieces.
2. On the linkage, due to the resistance of work piece, high temperature will occur so the metal will therefore generates high heat to make the work pieces in molten condition.
Model No. |
ACEY-1000C
|
Energy storage capacitor |
6600UF |
Max output power of transformer |
18 KVA |
Output max short circuit current |
5000A |
Prewelding voltage |
80.0V -- 330V adjustable, accuracy 0.5V |
Welding voltage |
80.0V -- 330V adjustable, accuracy 0.5V |
Welding time |
1.0ms -- 20.0ms adjustable, accuracy: 0.1ms |
Applicable scope |
Max thickness of parallel welding: 0.03mm~0.15mm Max thickness of upper and lower butt welding: 0.1mm + 0.3mm |
Machine weight |
40KG |
Dimensions |
350L x 180W x 280H (unit: mm) |
Input power supply |
single-phase AC220V/50Hz |
Input current |
< 5A |
Input power |
< 1200W |