English

Linkage Row Horizontal Single Axis Tracker Solar Tracking System

It is horizontal with respect to the ground. Horizontal Trackers typically have the face of the panel oriented parallel to the axis of rotation.

Contact Now

Product Detail

Linkage Row Horizontal Single Axis Tracker

It is horizontal with respect to the ground. Horizontal trackers typically have the face of the panel oriented parallel to the axis of rotation. In single axis horizontal trackers, a long horizontal tube is supported on bearings mounted upon frames. Solar panels are mounted upon the tube, and the tube will rotate on its axis to track the apparent motion of the sun through the day.

Linkage Horizontal Single Axis Tracking System

Applicable Areas

1. Mid-high latitude flat land, mountainous terrain

2. Suitable for all types of modules, C-SI, A-SI, bi-facial modules

Features & Advantages

1. Single Higher installation capacity, single array up to 400KW max.

2. Fewer posts compared with competitors', greatly saving cost in fabrication and construction

3. Higher terrain flexibility, adaptive slope N-S direction 5°，E-W 12°

4. Higher reliability control& drive system, Siemens PLC control and verified components ensure the reliability of controller, one-click operating design, fewer number of control and drive units, fewer piles, allow for simple installation,operation and maintenance.

5. Full automatic tracking, high tracking accuracy of less than 0.5°,additional electric power output by 15-25%.

6. Centralized control,convenient for overall arrangement for power/communication wires

7. Wireless monitoring system & closed loop control system,maximize tracking accuracy and system reliability.

Technical Specifications

Technical Data of System	Type	Linkage Row Horizontal Single Axis
	Single array capacity（DC）	50KW～400KW Max
	Module number (pcs)	200~1200
	System max. voltage	1000V/1500V
	Tracking range	±45°
	Increased power output（compared with fixed tilt）	10%～25%
Mechanical Parameters	Drive type	Slew drive
	Structure material	HDG
	E-W slope adaptability	≤15°
	S-N slope adaptability	≤15°
	System dimensions (㎡)	Depending on array designed
	Foundation type	Concrete footing or ramming pile
	Max. Wind resistance	40m/s(customizable)
	Safe working wind load	18m/s
Electrical Parameters	Power supply	110V/220V/380VAC
	Motor	24VDC
	Frequency	50/60Hz
	Drive power	100～200W
	Power consumption	≤0.3kWh/day(≤3‰)
	Control mode	Closed loop time control
	Night return	yes
	Back tracking	yes
	Working temp. range	—25℃～65℃
	Protection class	IP65
	Communication protocol	RS485/Modbus