English

Industrial Plate Magnets

Plate Magnet

Different kinds of plate for customization:

1.Flat Face Plate Magnets

2.Exposed Pole (EP) Plate Magnets

3.Spout Magnet

4.Suspended Plate Magnet

Contact Now

Product Detail

Plate Magnet

Plate magnet Designed to be installed either chute or in the conveying process.They are most displayed at the terminal of conveyor, suspension above the conveyor belt. The strong magnetic field will attract and hold the iron tramps when material pass through.The plate magnet construction by inside magnet and out side stainless steel (304 or 316L).We can provide various type of plate magnet,mostly of Flat face,Exposed Pole,Spout magnet,Suspended plate magnet.

1. Flat Face(FF)

Flat Face Plate Magnets have ideal metal separation performance when assembled over the flow chute or belt applications with low-density product flows. Downstream processing facilities will be under continuous magnetic protection because plate magnets can lift ferrous tramps out of the product flow stream.

Specification

Item NO.	Dimension(mm)			Weight(kg/100MM
Item NO.	B	D	T	Weight(kg/100MM
KMFPM-FF60	250	175	51	5.7
KMFPM-FF120	300	225	76	10.4
KMFPM-FF150	450	360	111	19.1
KMNPM-FF60	190	125	36	3.7
KMNPM-FF120	250	175	46	5.9
KMNPM-FF150	330	240	56	10.3

Note:L can be decided by customer

2. Exposed Pole(EP)

Exposed Pole (EP) Plate Magnets are designed for removing tramp metals from the low volume materials flow. They will be installed below the materials flow in the process line.Widely use to capture ferrous contaminants from relative lower flowing material.

Specification

Item NO.	Dimension(mm)			Magnets Action Range	Weight(kg)/100MM
Item NO.	B	D	T	Magnets Action Range	Weight(kg)/100MM
KMFPM-EP60	250	175	51	60	5.7
KMFPM-EP120	300	225	76	120	10.4
KMFPM-EP150	450	360	111	150	19.1
KMNPM-EP60	190	125	36	60	3.7
KMNPM-EP120	250	175	46	120	5.9
KMNPM-EP150	330	240	56	150	10.3

3. Spout Magnet(SM)

Spouts Plate magnets are designed to remove ferrous tramp metal from high volume material flow or rapid material flow. Properly designing can prevent wash-off of ferrous tramps and fines.

Specification

Item NO.	Dimension(mm)			Magnets Action Range	Weight(kg)/100MM
Item NO.	B	D	T	Magnets Action Range	Weight(kg)/100MM
KMFPM-SM60	250	175	51	60	5.7
KMFPM-SM120	300	225	76	120	10.4
KMFPM-SM150	450	360	111	150	19.1
KMNPM-SM60	190	125	36	60	3.7
KMNPM-SM120	250	175	46	120	5.9
KMNPM-SM150	330	240	56	150	10.3

4. Suspended Plate Magnet(SPM)

Suspended plate Magnets are designed for effective tramp metals extraction from the high volume material by Installation above Conveyors Using big size ferrite and properly designed configuration ensure the tramp iron can be taken from thick layer material flow by heavy duty plate. For fine metal powders in thin layer material flow, light duty plate made of rare earth magnet is available also. Supplied with deep mounting tapped holes in the back of pate or four eye bolts, these plate magnets can be rigidly mounted with threaded bolts or suspended by eye bolts using cable or chain systems.

Specification

Item NO.	Dimension(mm)			Magnets Action Range	Weight(kg)
	H	A	B
KMPM-SPM18	180	400	400	180	123
		500	500		129
KMPM-SPM25	250	600	600	200	380
		700	700		517
KMPM-SPM35	350	800	800	220	1064
		900	900		1346
KMPM-SPM36	400	1000	1000	240	1851
		1100	1100		2240
		1200	1200		2667