Alu zinc steel coil highlights
☆ High rust resistance:
Our steel mill can make alu-zinc coating from 40 to 200g/m².
☆ Wide standard ranges:
JIS G3321 1998,ASTM A792M 2003,EN10327 2004 for your choices.
Galvalume steel strips available specification
Material: |
CGCC, DX51D, Q235, Q345, ASTM 792/792M |
Alu-zinc coating: |
30 ~ 180 g/m² |
Thickness range: |
0.20 ~ 1.20 mm |
Coil width range: |
600 ~ 1250 mm |
Coil ID: |
508 / 610 mm |
Coil weight: |
3 ~ 8 tons |
Surface treament: |
Anti-finger printing, Chromated, oiled/non-oiled |
Hardness: |
Normal, hard, full hard |
Al-Zn alloy steel application
☆ Buildings:
Roofs, walls, garages, soundproof walls, pipes and modular houses, etc.
☆ Automobiles:
Muffler, exhaust pipe, wiper attachment, fuel tank, truck box, etc.
☆ Home appliances:
Refrigerator backboard, gas stove, air conditioner, electronic microwave oven, LCD frame, CRT explosion-proof tape, LED backlight, electrical cabinet, etc.
☆ Agricultural:
Pig houses, chicken houses, granaries, greenhouse pipes, etc.
☆ Other:
Heat insulation cover, heat exchanger, dryer, warmer, etc.
Packing & Delivery:
☆ Packing:
All steel coils from Yumisteel will be well packed as follows.
☆ One layer of Mildew paper and one layer of moisture-proof kraft paper to protect the steel coils.
☆ One 3.5cm thick kraft paper loops inside,and connected with mildew paper and of moisture-proof kraft paper to make sure the steel coils are well protected.
☆ Then again one layer of steel sheet on the surface and tighted with steel strips.
☆ When loading,we put mildewproof bags in the container.
☆ Delivery:
Delivery time for regular sizes: 15-20 days ;
Delivery time for special sizes: 25-30 days ;
Delivery term: FOB/CIF/CFR/DDP is available;
We can find good forwarder for customer or accept appointed forwarder from customers.