32140 33140 5V 10A Battery Charge Discharge Tester For BAK GOTION EVE CATL Cylinder Cell
1.Equipment features and appearance structure
System Features:
●Single point independent, independent constant current and constant voltage source, stable without impact. Functions such as start, stop, pause, resume and protection can be realized.
●The equipment accuracy is 0.05%, the data recording time is 1 second/time, and the stability is high.
●The software has powerful functions and friendly man-machine interface.
●Four-wire test interface to ensure high measurement accuracy. Modular design concept, easy to maintain.
The structure of this equipment is mainly composed of the following parts:
1.Independent CPU board, double keyboard board, unified sending control of the whole cabinet;
2.8-channel constant current and constant voltage control module;
3.Bidirectional AC/DC inverter module;
4.Tray-type automatic clamping and clamping (cylinder) mode.
2.System structure and working principle
System Composition
1.Lithium battery is converted into capacity equipment.
2.Computer with USB interface (bring your own).
3.USB to 485 interface converter or five types of communication lines and crystal heads.
4.Battery scanning system.
5.Shengchuang product software.
System principle
The equipment is connected and controlled by a computer to send commands and collect data; the keyboard can manually operate the equipment to display parameters and status; the constant current board is commanded by the CPU and has constant current and constant voltage functions; when the battery is charged, the two-way power supply converts alternating current to 14V Direct current, through the constant current board to realize the charging control and detection of the battery; when the battery is discharged, the process is opposite to the charging process. First, the battery voltage is raised to 15V through the constant current board, and then the two-way power supply converts the direct current into alternating current and feeds it directly. into the AC power distribution network of the factory, thus realizing the energy feedback of battery discharge electric energy.
Significant power saving effect: According to actual measurement, the power consumption of the device during charging is more than 40% lower than that of traditional devices, the comprehensive power saving rate is more than 60%, and the power consumption is more than 60%, saving a lot of costs for battery manufacturers.
3.Main technical parameters
|
Structure of equipment |
|
|
Number Of Device Channels |
The whole machine has a total of 256 channels |
|
Dimensions |
L1684*W1091*H1640 |
|
Chassis Color |
Standard gray black (can be customized) |
|
Fixture Form |
Customized fixture, using pallet structure, cylinder open clamp. |
|
Fixture Spacing |
37mm |
|
Support Battery Specifications |
Length: 120-185mm; Diameter: 34/35mm |
|
Channel Control Mode |
Each battery has an independent constant current and constant voltage source, which is stable and without impact. can be realized |
|
start, stop, pause, resume and protect |
|
|
Each channel has independent constant voltage and constant current hardware control circuit |
|
|
Working Power |
The charging current and discharging current accuracy of each channel can be automatically calibrated by software |
|
Power Factor |
Three-phase five-wire system AC380V±10%, 50HZ |
|
Ac Current Distortion Rate |
≥0.99 |
|
Power Department Efficiency Index |
≤2% |
|
Working Power Consumption |
Charge ≥80%, discharge ≥70% |
|
Equipment Failure Rate |
<1% |
|
Working Environment |
Temperature -10~40, relative humidity 80% |
|
Cooling Method |
TNatural air intake, upward exhaust |
|
Power Section Protection Function |
1. Grid voltage over-limit protection 2. Power grid frequency over-limit protection |
|
Channel parameters |
|
|
Voltage measurement range |
DC 0~5V |
|
battery voltage range |
Charging DC 0~4.5V; Discharging DC 4.5~2V |
|
Constant voltage range |
DC 2~4.5V |
Voltage accuracy
±(0.5‰ reading+0.5‰ full scale),
Voltage control resolution
0.1mV
Voltage sampling resolution
0.1mV
Voltage stability
≤(±1mV)
Current range
Charging DC 50mA～20A; Discharging DC 50mA～20A
Current accuracy
±(0.5‰reading+0.5‰full scale)
Current control resolution
1mA
Current sampling resolution
0.1mA
Current stability
≤(±1mA)
Current Rise Time (90% Load)
≤50MS
Channel startup time (90% load)
≤50MS
Product Details
Bronze supplier
Facebook 
Twitter 
Linkedin 
YouTube 
Blogger 
Instagram 
