English

1-32 Series Battery Management System BMS Tester

BMS tester is used in the safety test of lithium battery protection board, to detect whether the functional indicators of the protection board are within the reasonable parameters.

Product Origin :
China
Payment :
T/T
Warranty :
One Year warranty with lifetime support
Order(Moq) :
1
Compliance :
CE Certified
Item No. :
ACEY-BMS8858
Brand :
ACEY
Lead Time :
7days

Contact Now

Product Detail

1-32 Series Battery Management System BMS Tester

Product Description

1-32 series power battery protection board tester with high degree of automation, fast testing speed and high testing accuracy. With test overcharge, overcharge recovery, overdischarge, overdischarge recovery, overcurrent (overcharge current and overdischarge current), internal resistance, self-consumption, short-circuit protection, overcharge protection time, overcurrent protection time, overdischarge protection time, equalization current, equalization voltage, 13 performance.

Can meet the current market lithium ternary batteries, lithium iron phosphate batteries and cobalt acid battery protection plate test, with lithium ternary batteries, lithium iron batteries and cobalt acid battery test gear switching function.

The instrument requires connection to a computer, computer hardware configuration requirements for general office computers can be, the system generally requires XP system, the instrument and the computer using industry-standard 232 interface.

Parameter

1. Input power requirements: 180 ~ 240V 50/60HZ, power: 5000W
2. The equipment access to the power requirements of the domestic use of 220V/50HZ alternating current, allow fluctuations in the range of 10% or less.
3. Charging and discharging voltage: 5000mV ~ 160,000mV
4. The equipment can be used to detect and set the voltage range when charging or discharging.
5. Current accuracy: ±(0.1%FS+0.1%RD)
6. When the device detects or sets the current, the error range, i.e. 0.1% of the full scale plus 0.1% of the reading error
7. Voltage accuracy: ± (0.1%FS+0.1%RD)
8. Equipment in the detection or setting voltage, the error range, that is, 0.1% of the full scale plus reading error 0.1%.
9. Current resolution: 1mA, the smallest unit used by the device when detecting or setting current.
10. Voltage resolution: 1mV, the smallest unit used when the device detects or sets the voltage.
11. Cycle: cycle times:1～9999 times
12. Using the programming, the number of times the device carries out an uninterrupted cycle of the various indicators of the protection board.
13. Log tracking
14. With log function, including testing the entire process of operation records, exception records, can be used to test the process of tracing.
15. Data processing, man-machine interface
16. Test data is saved in EXCEL file.
17. The RS232 interface is used for the interface between the device and the upper computer, which can ensure the stability and real-time data acquisition.
18. Accuracy calibration / software calibration
19 with a sweep start function
20.MES system connection

Test Functions

No.	Function	Setting range	Testing accuracy	Unit
1	Single section self-consumption	0--500	±0.1	uA
2	Self-consumption	0--5000	±1	uA
3	Overcharge protection voltage	500--5000	±1	mV
4	Overcharge protection release voltage	500--5000	±1	mV
5	Overcharge protection delay time	0--10000	±1	mS
6	Over-discharge protection voltage	500--5000	±1	mV
7	Over-discharge protection release voltage	500--5000	±1	mV
8	Overcharge voltage protection delay time	0--10000	±1	mS
9	Overcharge current protection value	0.1--500	±0.01	A
10	Overcharge current protection delay time	0--20000	±1	mS
11	Overcharge current protection value	0.1--800	±0.01	A
12	Over discharge current protection delay time	0.1--20000	±1	mS
13	Equalizing opening voltage	500--5000	±1	mV
14	Equalizing Current	1--500	±1	mA
15	Charging Aging Current	0.1--200	±0.01	A
16	Discharge Aging Current	0.1--200	±0.01	A
17	Charging aging time	0--30	±1	S
18	Discharge current aging time	0--60	±1	S
19	Single section self-consumption difference	0-500	±0.1	uA
20	Resistance	0-999	±1	mΏ
21	Short circuit protection time	0--5000	±1	uS
22	Charging aging voltage	500--5000	±1	mV
23	Single discharge aging voltage	500--5000	±1	mV
24	Open circuit voltage	102000	±1	mV
25	Number of voltage simulations	32	0	PCS

Other technical parameters

Item	Parameter Description
Consumption Current Measurement Range	1 ~ 5000uA
Consumption current resolution	0.1uA
Resistance	AC internal resistance:0-999mr
Protection time resolution:	overcurrent protection time: 0-999ms; short circuit protection time: 0-999us
1 channel signal voltage output:	500~5000mV
AD/DA bit	AD: 16bit DA: 16bit
Discharge mode	CC mode
32 analog cores	Input/output 500~5000mV, voltage accuracy ±0.1%
Communication rate	2-way SBS communication, communication rate 10~100Kbps
Other	One way voltage sampling, 0~5000mV, accuracy:±0.1%
Protection function	Global protection parameters (including reverse connection protection, voltage lower limit protection, voltage upper limit protection, current upper limit protection), CC charging protection parameters (abnormal voltage trend protection, abnormal charging current fluctuation protection, abnormal voltage fluctuation protection), CC discharge protection parameters (including abnormal voltage trend protection, abnormal discharge current fluctuation protection, abnormal voltage fluctuation protection)
Communication	The interface of the device adopts RS232/DB9 interface, and the communication rate is 38400, which can ensure the stability and real-time data acquisition. All communication ports of the device are isolated and have lightning protection design.
Circuit structure	Modular structure, available spare parts, spare parts for timely replacement and maintenance.
Equipment organization	Split cabinet structure
Safety level	Conforms to EN60950 and GB4943 requirements.
Noise	Test noise according to IEC62040-3 method, noise less than 70dBA.
Noise	The sound level meter used should meet the requirements of IEC804 Type I, and the accuracy should be better than ±0.5dB.
Protection grade	IP20
Cabinet color	Gray-white
Cabinet color	Gray-white
Lightning protection	Reach the 2-pole lightning protection requirement of GB17626.
Cooling	Forced air cooling, air outlet and air inlet to retain at least 20cm of space
Starting pulse voltage	The maximum allowable pulse voltage at the moment of equipment testing and starting the process is ≤ (set number of test strings * set voltage of single unit)*110%, T≤500uS;
Starting pulse current	The maximum allowable pulse current at the moment of equipment testing and starting overcurrent testing process is ≤ (set number of test strings * set single-unit voltage * 110%, T ≤ 500uS); T ≤ 1mS;
Wiring method	Adopt reliable spring crimping method, flexible disassembly and replacement.